Beskrivelse

KinCony's DIN rail relay controller, built around an ARM processor and 16 OMRON G2R-1-E SPDT type removable relays. Each channel has a COM/NO/NC output and accepts a 12 V or 24 V DC coil; the maximum current is 16 A at 250 V AC, for a consumption of 0.53 W per channel and a maximum switching frequency of 20 times per minute. Housing of 284 x 105 x 73 mm, operating temperature from -40 to 55 °C. Mechanical life greater than 5 million operations and electrical life greater than 100,000 operations under rated load. Three control modes: by high level (12 or 24 V) or low level (0 V), by the 16 push buttons on the board — extendable up to 500 meters by cable — or by RS485 Modbus command (standard protocol, 38400 bps by default, address set by 4-bit DIP switch). Integrates with Home Assistant via ESPHome.